Home > Exhibition > Content

Three-level commissioning and inspection of the elevator

Nov 09, 2018

After the elevator installation is completed, how to debug it? Today, the elevator house is introduced to you: the three-level debugging and inspection of the elevator.

 

(1) After the installation of the elevator is completed, the installation and construction unit shall perform the commissioning and inspection of the self-inspection nature.


(2) After the self-inspection of the installation unit, the elevator manufacturing unit shall verify and debug the elevator according to the requirements of the safety technical specifications, and shall be responsible for the results of the verification and commissioning.


(3) Finally, the inspection and testing institutions approved by the special equipment safety supervision and administration department of the State Council shall conduct supervision and inspection in accordance with the requirements of safety technical specifications, and then put into operation after passing.


This article tags: elevator three-level debugging inspection