H series of escalators for lifting the height of 14M 20M between the public utilities construction, technically, the use of two host systems to ensure that the escalator operation of the power, automatic lubrication device, eliminating the need for the old timer lubricating oil trouble; use The...
H series of escalators for lifting the height of 14M 20M between the public utilities construction, technically, the use of two host systems to ensure that the escalator operation of the power, automatic lubrication device, eliminating the need for the old timer lubricating oil trouble; use The range is generally in the subway, airports, large conference centers, etc .; in order to ensure safe operation of the H series in the outdoor environment, the structure has done a low temperature, high temperature and moisture windproof treatment; this series also received the approval of the United States ASME institutions, access to EU standards.
The main parameters of the escalator are:
Lifting height: generally within 10 meters, special circumstances can be tens of meters.
Tilt angle: generally 30 °, 35 °.
Speed: usually 0.5 m / s, and some ladder up to 0.65 m / s, 0.75 m / s
Step width: 600 mm, 800 mm, 1000 mm.
Theoretical delivery capacity: According to the speed of 0.5 m / s calculation, the transport capacity of different step width corresponding to 4500 people / hour, 6750 people / hour, 9,000 people / hour.
Step pitch and traction chain pitch and so on.
Can be widely used in stations, docks, shopping malls, airports and subway and other crowded places. In 1900, a staircase escalator on display at the Paris International Fair was the prototype of a modern escalator. Since then, escalators have developed rapidly in various countries.
|2||Floor front panel|
|5||Floor back panel|
2 front plate
|Aluminum alloy||ES-205 (stamping) stainless steel||ES-207 (stamping) stainless steel||ES-203 (Etching)|
Stainless steel cascade: standard black optional gray
Aluminum cascade: standard gray optional black
The main parameters
|Nominal width [mm]|| 800 1000 1200|| 800 1000 1200||1000 1200|
|Lifting height [mm]||2000-8000[35°2000-6000]|| 8000-14000||14000-20000|
|power supply||AC 380v, 50HZ; 220V,50HZ|
|BT||Handrail||Glass||Outer cover||Exterior decoration||Skirt||Handrail frame|
|BTL||Handrail||Lighting device||glass||Handrail frame|
|BB||Handrail||Cover||Exterior decoration||Skirts||Stainless steel wall panels|
Handrail with speed protection
When the handrails stop, speeding, breaking, the escalator will stop automatically.
Skirt protection switch
Four protection switches are mounted inside the skirt, two on the top and two on the bottom. When a foreign object is caught in the middle of the class and the apron and approaches the leading edge plate, any one of the switches immediately stops the escalator operation.
Handrail protection switch
If there is a foreign object stuck between the handrail and the handrail protection, the handrail protection switch will automatically stop the handrail/sidewalk.
emergency stop button
The emergency stop button is located on the escalator up / down entrance and is installed on the pillar column skirt and column cover. If necessary, press the red button and the escalator will stop safely.
Drive chain chain protection device
Drive chain link chain protection device is located in the upper truss escalator, when the drive chain is broken, the switch will be triggered, the brake immediately start the escalator to stop running.
Step down protection switch
The four stepdown sag switches are located on the upper and lower escalator trusses, sensing the switch when the step sags and stopping the escalator by shutting off the safety circuit.
Safety brushes improve passenger safety by guiding passengers away from the apron.
|Cascade border bar|
The three steps of the rung are fitted with yellow molding resin to allow passengers to clearly distinguish between riding areas
Comb board protection switch
This switch is installed at the upper and lower ends of the escalator. When the foreign object is raised by the comb teeth, the comb protection switch immediately stops the escalator operation.
Cascade chain protection device
2 This unit is installed at the escalator level (lower part) and stops the escalator operation when the chain is broken or lengthened.
30 ° escalator layout
|Electrical Control System||PLC / Microcomputer|
|Inner and outer cover material||stainless steel|
|Stainless steel/aluminum alloy|
|Carbon steel + low friction duster / stainless steel|
|Comb teeth||Aluminum alloy|
|10mm transparent glass|
|Front plate||Aluminum alloy / stainless steel|
BAHD Elevator, established in 1995, is one of the largest manufacturers and suppliers of the outdoor escalator with good quality in China. Offering cheap price, excellent service and fast delivery, we're also known as one of the world famous brands. Welcome to get the price list from us.